[2021] the latest update to Cisco 300-510 dumps and free sharing of exam practice questions from Lead4Pass

Cisco 300-510 exam ready here! Get the latest 300-510 exam exercise questions and exam dumps pdf for free! 100% pass the exam to select
the full Cisco 300-510 dumps: https://www.leads4pass.com/300-510.html the link to get VCE or PDF. All exam questions are updated!

leads4pass offers the latest Cisco 300-510 Google Drive

^{[Latest updates]} Free Cisco 300-510 dumps pdf download from Google Drive: https://drive.google.com/file/d/1fRS-p0ptV6m8EpbvhybH5ZkFPS62Eu8N/

Pursue4pass Exam Table of Contents:

• latest updated Cisco 300-510 exam questions and answers
• leads4pass Cisco discount code
• About leads4pass

latest updated Cisco 300-510 exam questions and answers

QUESTION 1
In which four ways does DHCPv6 differ from DHCPv4? (Choose four.)
A. DHCPv6 uses the same message types as DHCPv4.
B. DHCPv4 functions without external protocols.
C. A host discovers a DHCPv6 server by using a DHCP Discover packet.
D. A hosts discover a DHCPv6 server by using a DHCP Solicit packet.
E. A DHCPv6 server replies with a DHCP Offer packet.
F. A DHCP server replies with a DHCP Advertise message.
G. An IPv6 host can request multiple addresses at the same time from a DHCPv6 server.
H. An IPv6 host can request only one IP address at a time from a DHCPv6 server.
Correct Answer: BDFG

QUESTION 2
Which two statements about mapping multicast IP addresses to MAC addresses are true? (Choose two.)
A. All mapped multicast MAC addresses begin with 0x0100.5E
B. The router performs the mapping before it hands the packet off to a switch
C. All multicast MAC addresses end with 0x0100.5E
D. The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets
E. All destination MAC addresses begin with an octet of binary 1s
Correct Answer: AD

QUESTION 3

Refer to the exhibit. Router 1 is connected to router 2 on interface TenGigE0/1.
Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
A. TenGigE0/1 interface provides the alternate path
B. A backup path must be statically installed
C. TenGigE0/2 interface provides the alternate path
D. A primary path must be manually installed
Correct Answer: C

QUESTION 4
Which two methods represent IPv6 tunneling implementations? (Choose two.)
A. IPv6 over GRE tunneling
B. manually configured tunnels
C. automatic tunnels
D. 6to4 tunneling
E. IPv6 over an IPv4 tunnel over MPLS
Correct Answer: BC

QUESTION 5
For which reason can two BGP peers fail to establish a neighbor relationship?
A. Their BGP send-community strings are misconfigured
B. Their BGP timers are mismatched
C. Their remote-as numbers are misconfigured
D. They are both activated under an IPv4 address family
Correct Answer: C

QUESTION 6
Which task is performed when troubleshooting LDP?
A. Execute the ping utility to generate information about the MAC addresses used along the path
B. Verify that MPLS is disabled globally and enabled on the necessary interfaces on a per-interface basis
C. Execute the traceroute utility to generate information about the labels used along the path
D. Verify that Cisco Express Forwarding has been disabled on the network
Correct Answer: C

QUESTION 7
Which two statements about route reflectors are true? (Choose two.)
A. Routes received from nonclient peers have reflected route reflector clients as well as nonclient peers.
B. Routes received from nonclient peers are reflected to route reflector cluster as well as OSPF peers.
C. If a router received an iBGP route with the originator-ID attribute set to its own router ID, the route is discarded.
D. Routes received from a route reflector client is reflected by other clients and nonclient peers.
E. If a route reflector receives a route with a cluster-list attribute containing a different cluster-ID, the route is discarded.
Correct Answer: CD
Reference: http://www.networkers-online.com/blog/2009/02/bgp-route-reflector-basics/

QUESTION 8
DRAG DROP
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Select and Place:

Correct Answer:

Reference: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html

QUESTION 9

Refer to the exhibit. After you apply these configurations to routers R1 and R2, the two devices could not form a
neighbor relationship. Which reason for the problem is the most likely?
A. The two routers cannot authenticate with one another.
B. The two routers have the same area ID.
C. The two routers have the same network ID.
D. The two routers have different IS-types.
Correct Answer: C

QUESTION 10

Refer to the exhibit. A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1.
Which configuration meets this need?

A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C

QUESTION 11

Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The
BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open TCP port 179
to each other.
Which action fixes the issue?
A. Change HMAC-MD5 to HMAC-SHA1-20
B. Configure the send and accept lifetime under key 1
C. Change HMAC-MD5 to MD5
D. Change HMAC-MD5 to HMAC-SHA1-12
Correct Answer: B

QUESTION 12

Refer to the exhibit. After troubleshooting the BGP traffic steering issue, which action did the network operator take to
achieve the correct effect of this configuration?
A. Routes that have passed through AS 65517 have the local preference set to 150.
B. Routes that have originated through AS 65517 have the local preference set to 150.
C. Routes directly attached to AS 65517 have the local preference set to 150.
D. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
Correct Answer: A

QUESTION 13

Refer to the exhibit. A network engineer implemented this segment routing configuration. Which statement about the output is true?
A. This range conflicts with the segment routing local block range.
B. The device must be reloaded for these ranges to be allocated and used.
C. The default segment routing global block range is being used on this device.
D. A nondefault segment routing global block range is being used on this device.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/segment-routing/segment-routingbook/seg-routing-global-block.html

leads4pass Cisco discount code

About leads4pass

leads4pass has 8 years of exam experience! A number of professional Cisco exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the Cisco exam! Exams are a part of life, but they are important!
In the study, you need to sum up the study! Trust leads4pass to help you pass the exam 100%!

Summarize:

Pursue4pass free to share Cisco 300-510 exam exercise questions, 300-510 pdf, 300-510 exam video! leads4pass updated exam questions and answers throughout the year!
Make sure you pass the exam successfully. Select lead4Pass 300-510 to pass Cisco 300-510 exam “Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)“.

ps.

Latest update leads4pass 300-510 exam dumps: https://www.leads4pass.com/300-510.html (71 Q&As)
^{[Latest updates]} Free Cisco 300-510 Dumps pdf download from Google Drive: https://drive.google.com/file/d/1fRS-p0ptV6m8EpbvhybH5ZkFPS62Eu8N/