Latest Cisco Systems Engineer 500-230 dumps,500-230 Practice test Questions and answers

Free Cisco service Provider routing field Engineer Exam Questions & Exam Dumps. Share Cisco Systems Engineer 500-230 dumps and download 500-230 PDF online for free, online practice tests help you easily upgrade your skills, get the full 500-230 exam dumps: https://www.leads4pass.com/500-230.html (Total questions:30 Q&A)

[PDF] Free Cisco Systems Engineer 500-230 pdf dumps download from Google Drive: https://drive.google.com/open?id=1rk4p7ixOXkR-I4nVRvFMwIQ6TRLxT4Dt

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

Exam 500-230: Installation, Storage, and Compute with Windows Server 2016: https://www.Cisco.com/en-us/learning/exam-500-230.aspx

Latest effective Cisco Systems Engineer 500-230 Exam Practice Tests

QUESTION 1
Which command removes a user from configuration mode but keeps the user connected to the router?
A. clear line
B. clear session
C. clear commit
D. clear config session
Correct Answer: D

QUESTION 2
Which underlying protocol(s) does LDP utilize to communicate with LDP Peers?
A. UDP and TCP
B. UDP only
C. LDP uses IP Protocol 646 and does not rely on UDP or TCP
D. TCP only
Correct Answer: A

QUESTION 3
One of your peers show in the SHOW BGP VPNV4 UNICAST SUMMARY output
What is the cause of this?
A. The label value ranges are mismatched.
B. The peer has no prefixes with a Route-Target that the local router is importing.
C. The BGP prefixes between the routers have not fully converged and will correct itself in time.
D. The peer router is not configured to use the VPNv4 address-family for this connection.
Correct Answer: B

QUESTION 4
What information is unchanged after a process restart?
A. Job ID
B. Last Started
C. Respawn Count
D. Process ID
Correct Answer: A
Note that ospf process is given a Job ID (JID), which is 250. This never changes on a running router and generally on a
particular version of Cisco IOS XR. Within the ospf process there are five threads each with their own Thread ID (TID).
Listed is the stack space for each thread, the priority of each thread and its state.

QUESTION 5
Which command is run to make changes permanent and survive a reload after executing the command “copy
disk0:config-file.txt running-config”?
A. Commit Confirm
B. Commit Copy
C. Command not require, changes are committed automatically
D. Commit
Correct Answer: D

QUESTION 6
What does “ifmgr” represent in the output below?
LC/0/3/CPU0:Mar 23 08:04:31.644 : ifmgr[151]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface
POS0/3/0/7, changed state to Down
A. The SYSMGR process restarted the ifmgr process as a result of this log message.
B. The WDSYSMON process is tracking this process to prevent it from bringing the interface up.
C. The ifmgr process has restarted 151 times and brought the interface down as a result.
D. The ifmgr process created this log message.
Correct Answer: D

QUESTION 7
Which command is required to permit the retention of BGP Prefixes on a router with VRFs not importing the associated
Route Target?
A. route-policy PASS-ALL in
B. retain route-target all
C. import route-target policy all
D. import route-target all
Correct Answer: B

QUESTION 8
What command is used to manually generate a core dump to aid in troubleshooting a process?
A. context
B. dumpcore
C. exception
D. follow
Correct Answer: C

QUESTION 9
Which command is an example of how to configure system logging to a Syslog server?
A. logging 172.21.116.27
B. syslog server1
C. logging syslog-server 172.21.116.27
D. enable syslog server1
Correct Answer: A

QUESTION 10
Which protocol is a PE to CE routing protocol?
A. ODR
B. LDP
C. RIPv1
D. eBGP
Correct Answer: D

QUESTION 11
Which command is run to make changes permanent and survive a reload after executing the command “copy
disk0:config-file.txt running-config”?
A. Commit Confirm
B. Commit Copy
C. Command not require, changes are committed automatically
D. Commit
Correct Answer: D

QUESTION  12
What is included in a VPNv4 route?
A. IPv4 prefix and Route Distinguisher
B. IPv4 prefix and Route Target
C. MP-BGP prefix and Route Target
D. MP-BGP prefix and Route Distinguisher
Correct Answer: A

QUESTION 13
What BGP address-families are used between the ASBRs in the different AS\\’es in an IPv4 Option C Layer-3 VPN
solution?
A. VPNv4 Unicast Only
B. IPv4 Umcast and VPNv4 Unicast
C. IPv4 Labeled-Unicast only
D. IPv4 Unicast and IPv4 Labeled-Unicast
Correct Answer: D

QUESTION 14
How are labels exchanged between the AS\\’es in an Option B Layer-3 VPN solution?
A. Via an eBGP multihop connection between the Ingress PE\\’s in each AS. B. Via an eBGP multihop connection between a Route-Reflector in each AS.
C. There are no labels exchanged between the two AS\\’es.
D. Via an eBGP connection between the directly connected ASBR\\’s, one in each AS.
Correct Answer: D

QUESTION 15
Which command is required to permit the retention of BGP Prefixes on a router with VRFs not importing the associated
Route Target?
A. route-policy PASS-ALL in
B. retain route-target all
C. import route-target policy all
D. import route-target all
Correct Answer: B

Welcome to Jrocam.com!
We share the (Cisco,microsoft,citrix,comptia) exam dumps for free. Share 15 of the latest Cisco Systems Engineer 500-230 exam dumps for free to enhance your skills and experience! Complete cisco 500-230 dumps: https://www.leads4pass.com/500-230.html (Total questions:30 Q&A)

[PDF] Free Cisco Systems Engineer 500-230 pdf dumps download from Google Drive: https://drive.google.com/open?id=1rk4p7ixOXkR-I4nVRvFMwIQ6TRLxT4Dt

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

leads4pass Promo Code 12% Off

related: https://www.pursue4pass.com/cisco-ccnp-data-center-300-165-dumps/