Why choose Cisco CCNA Wireless 200-355 dumps exam? Lead4pass offers latest Cisco CCNA Wireless 200-355 dumps exam questions and answers free download. Helpful newest Cisco CCNA Wireless 200-355 dumps pdf materials and vce youtube demo update free shared. “Implementing Cisco Wireless Network Fundamentals” is the name of Cisco CCNA Wireless https://www.leads4pass.com/200-355.html exam dumps which covers all the knowledge points of the real Cisco CCNA Wireless. The best and most updated latest Cisco CCNA Wireless 200-355 dumps pdf training resources and study guides free download, pass Cisco 200-355 exam test easily at first attempt.
High quality Cisco 200-355 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRM01sZjQ2dUtRckU
High quality Cisco 200-310 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VROXBqSzZWaThrVlE
The Best Cisco CCNA Wireless 200-355 Dumps Exam Questions And Answers (1-30)
QUESTION 1
A customer wants to analyze the data rates that are available to a corporate laptop in its wireless deployment. The customer wants a heat map that displays actual data and shows the data rates that are available to the client in different areas of its facility. When using AirMagnet Survey PRO, which type of survey provides the actual data rates?
A. virtual
B. predictive
C. passive
D. active
Correct Answer: D
QUESTION 2
A network engineer notices that two mesh APs are having problems communicating. After reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW while the other is transmitting at 60 mW. How many decibels would the 3-mW AP need its power increased to match the 60-mW AP?
A. 8
B. 12
C. 13
D. 20
E. 57
Correct Answer: C
QUESTION 3
Refer to the exhibit. A customer is using central web authentication with a Cisco 5508 Wireless Controller and Cisco Identity Services Engine. An error occurs when wireless clients are redirected to the hosted splash page. What is causing the client error?
A. Secure Web Mode is disabled on the WLC.
B. OCSP is disabled on the WLC.
C. Management Via Dynamic Interface is disabled on the WLC.
D. Ethernet Multicast Forwarding is enabled on the WLC.
Correct Answer: A
QUESTION 4
Which path do you take to manage the results of a report that had been run on network utilization? 200-355 dumps
A. Reports andgt; Report Launch Pad andgt; Device andgt; Utilization
B. Reports andgt; Report Launch Pad andgt; Scheduled Run Results
C. Reports andgt; Saved Reports andgt; Scheduled Run Results
D. Reports andgt; Scheduled Run Results
Correct Answer: D
QUESTION 5
Select and Place:
Correct Answer:
QUESTION 6
An engineer is using a predictive survey tool to estimate placement of APs in a carpeted office space. Most interior walls should be assigned which attenuation value?
A. 2 dB
B. 3 dB
C. 4 dB
D. 5 dB
Correct Answer: B
QUESTION 7
Which wireless topology supports roaming?
A. IBSS
B. BSS
C. ESS
D. bridging
Correct Answer: C
QUESTION 8
Which two factors must be considered when evaluating an RF interferer for severity? (Choose two.)
A. distance from the AP
B. dBm
C. the type of security crack being used
D. duty cycle
E. number of interfering IP stations in the cell
F. duplicate SSID
Correct Answer: BD
QUESTION 9
A controller is connected to a Cisco Catalyst switch. The switch port configuration looks like this:
interface GigabitEthernet 1/0/10
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,20,30,50
switchport trunk native vlan 20
switchport mode trunk
Which controller CLI command assigns its management interface to the native VLAN interface of the Cisco Catalyst switch?
A. config interface vlan management 0
B. config interface vlan management 1
C. config interface vlan management 20
D. config interface vlan management 30
E. config interface vlan management 50
Correct Answer: A
QUESTION 10
An engineer has been asked to disable all OFDM rates in the wireless environment. What three rates should be disabled to fulfill this requirement? 200-355 dumps (Choose three.)
A. 2
B. 5.5
C. 6
D. 9
E. 11
F. 12
G. 18
Correct Answer: ABE
QUESTION 11
Which type of authentication is used initially by a controller-based AP so that a guest client can get an IP address?
A. 802.1x
B. EAP
C. LEAP
D. open authentication
E. TLS
F. SSL
Correct Answer: D
QUESTION 12
Refer to the exhibit. During deployment of a WLC on a customer site, the GUI log displayed this error message. What could be causing this error?
A. An access point has been assigned to an AP group that has reached maximum capacity.
B. An access point has been assigned to an AP group that has been deleted.
C. An access point has been removed from an AP group and assigned to a FlexConnect AP group.
D. An access point has been removed from an AP group and assigned to the default AP group.
Correct Answer: B
QUESTION 13
Which user group has the ability to configure all features of the Cisco WCS except the user accounts and passwords?
A. Admin
B. SuperUser
C. Root
D. Supervisor
Correct Answer: A
QUESTION 14
An engineer is connecting a Cisco 5508 Wireless Controller that must connect to an out-of- band management network for management only. Which two options should be used for the port on the WLC and the cable type? (Choose two.)
A. service port
B. redundancy port
C. console port
D. distribution system port
E. straight through cable
F. crossover cable
G. console cable
Correct Answer: AE
QUESTION 15
How does an LWAP receive a configuration file?
A. It is configured manually.
B. It receives a configuration from the controller.
C. It automatically ships with a configuration.
D. It receives a configuration from a TFTP server.
Correct Answer: B
QUESTION 16
What two capabilities would be present on a wireless client device that supports CCXv3? (Choose two.)
A. WPA2
B. 802.1x
C. PEAP-MSCHAP
D. NAC
E. MFP
F. EAP-TLS
Correct Answer: AB
QUESTION 17
A customer mounted three new APs in a small business. After configuring the IP address, users still could not access the web through the new access points. What two configurations are needed to fix this? (Choose two.)
A. Security parameters
B. Gateway address
C. Service Set ID
D. Antenna option
E. EAP Authentication
F. Unique AP Name
Correct Answer: BC
QUESTION 18
Which two statements about the results of the Cisco WCS version 7.0 client troubleshooting tool are true? (Choose two.)
A. Results of Layers 1 – 3 are provided.
B. Results of only Layers 2 and 3 are provided.
C. Results of Layers 4 – 7 are provided.
D. The tabulated results vary depending on the client type.
E. Results are provided in a fixed four-part tabulation.
F. Results are provided in a fixed six-part tabulation.
Correct Answer: AD
QUESTION 19
Select and Place:
Correct Answer:
QUESTION 20
Which two formats are available for Cisco WCS reports? 200-355 dumps (Choose two.)
A. PDF
B. CSV
C. HTML
D. TXT
Correct Answer: AB
QUESTION 21
An enterprise needs their iPhones to connect to the EAP-TLS network. How should the devices be configured?
A. push profile and certificate through Configuration Utility
B. configure directly through Settings application
C. email certificate to device then configure through Settings application
D. download certificate from web page then configure through Settings application
E. push profile and certificate through iTunes
Correct Answer: A
QUESTION 22
Which option describes computer-to-computer wireless communication?
A. BSS and BSA
B. IBSS and ad hoc network
C. ad hoc network and BSA
D. IBSS and ESS
E. ESS and BSA
F. BSS and ad hoc network
Correct Answer: B
QUESTION 23
A wireless engineer is designing the wireless networking for a company with offices in two different locations. Which two regulatory bodies should they check to find the maximum EIRP allowed? (Choose two.)
A. IEEE
B. FCC
C. ITU-R
D. ETSI
E. Wi-Fi Alliance
Correct Answer: BD
QUESTION 24
A customer has asked for its wireless equipment to be managed as securely as possible. Which three management protocols will provide encrypted access to the equipment? (Choose three.)
A. Secure Shell
B. HTTPS
C. SNMPv3
D. Telnet
E. SNMPv2c
F. HTTP
Correct Answer: ABC
QUESTION 25
The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their preshared key.
Which option shows the GUI path where you can check the connection status of that client?
A. WLANs andgt; WLAN_ID andgt; Advanced
B. Security andgt; Clients
C. Security andgt; Advanced andgt; Clients
D. Monitor andgt; Clients
E. Wireless andgt; 802.11b/g/n andgt; clients
Correct Answer: D
QUESTION 26
What authentication method requires a certificate on both the client and authentication server?
A. PEAP
B. EAP-TLS
C. EAP-FAST
D. WPA-PSK
E. WEP
F. EAP-TTLS
Correct Answer: B
QUESTION 27
What is the function of the Cisco AnyConnect DART tool? 200-355 dumps
A. creates a compressed bundle of client logs and information
B. visualizes a WLAN environment, showing the possible locations of problems
C. gathers statistics from neighboring clients for comparison to the baseline
D. helps to troubleshoot a WLAN connection by using easy-to-use wizards and statistic viewers
Correct Answer: A
QUESTION 28
Which protocol helps the administrator to determine whether a detected rogue AP is in the network of the organization?
A. RLDP
B. RCP
C. RDP
D. RAPP
Correct Answer: A
QUESTION 29
What three configuration options can be executed by navigating to the WCS Administration andgt; AAA menu? (Choose three.)
A. Add a Lobby Ambassador guest
B. Add a LDAP server
C. Add an administrative user
D. Add a MAC address list filter
E. Add a RADIUS server
F. Add a TACAS+ server
Correct Answer: CEF
QUESTION 30
An engineer is seeing a pattern closest to that of an Isotropic Radiator. What other antenna will produce a similar pattern?
A. 5 dBi patch
B. 13.5 dBi Yagi
C. 2.2 dBi omni
D. 21 dBi parabolic
Correct Answer: C
What Our Customers Are Saying:
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass
High quality latest Cisco CCNA Wireless 200-355 dumps exam practice files in PDF format free download from lead4pass. The best useful Cisco CCNA Wireless https://www.leads4pass.com/200-355.html dumps pdf training resources which are the best for clearing 200-355 exam test, and to get certified by Cisco CCNA Wireless, free download with high pass rate.
Why Select Lead4pass?
Lead4pass is the best provider of IT learning materials and the right choice for you to prepare for the exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. Lead4pass provide the latest real questions and answers with lowest prices, help you pass the exam easily at first try.